|
|
Other options are available and custom jobs are welcome. Email effects@woundedpaw.com for more info.
The prices listed are in Canadian dollars, currently worth about $0.96 US dollars.
Visit the Effects Forum section for other upcoming projects, requests and general effects disucssion.
|
|
Battering Ram Overdrive+Fuzz for Guitar and Bass
Stomp on the OVERDRIVE switch and you turn the pedal on and activate the overdrive section. It's a smooth overdrive which can go from completely clean to growling distortion.
The LO switch adds in the lower frequencies to make it full-range for bass as well as guitar.
The HI knob lets you either boost or cut the highs to dial in the tone you want.
Stomp on the FUZZ switch and the fuzz section gets added on top of the overdrive sound. This is a parallel processed pedal which means the fuzz section works from the clean guitar signal and gets mixed with the overdrive instead of one section following the other like in most 2 stage pedals.
The fuzz is a snarling, raspy beast which can get right out of control if you crank up the SUSTAIN. The deep lows are filtered out to keep it tight and bright. The TONE control goes from high-end cut to flat to a mid-cut, high end boost. And for another set of sounds there is the OCT switch to change the fuzz section into an octave up fuzz. Crazy.
This pedal can be used in a number of ways. Have the overdrive on all the time for your basic tone and stomp on the fuzz for that important bridge, chorus or solo. Or use both sections to shape your distortion sound. Use the overdrive for the lower frequencies to keep the growl without getting muddy and use the fuzz for the searing top end.
Or keep the overdrive section tame and use the fuzz section with the octave switch on to add that one bit of octave up.
Heavy Duty 4.5" x 3.5" Aluminum Enclosure
True Bypass
Bright Blue and Red LEDs
Review at BassFuzz.com with video and sound samples
Buy a Battering Ram Pedal - $190
|
|
|
|
|
Effects Loop Super Blender V2.0
The Super Blender is a parallel effects loop blender with 3 fully buffered effects loops plus a clean channel with tone controls.
Basically the instrument signal is split into 4 channels, sent to the 3 effects loops and the clean channel and then mixed back together.
Each effect loop can be switched on and off individually while the clean channel is on automatically when the main bypass footswitch is turned on.
Channel A has a feedback control which sends the return signal from the effect back to it’s send for interesting results.
There is also a switch to change channels B and C into a series configuration where the return from effects loop B is sent to the send of effects loop C.
Instruction Manual
Heavy Duty 7.5" x 5" Aluminum Enclosure
True Bypass
Buy an Super Blender Pedal - $175
|
|
|
Effects Loop Blender
Not only switch a chain of effects on and off but also blend it with your clean signal.
Both the effects loop and the clean signal are fully buffered before being mixed together via the blend control.
The master volume offers boost as well as cut to the output signal.
This pedal can also be used alone as a volume pedal or as a splitter to send a second signal to a tuner or a second signal chain.
Heavy Duty 4.5" x 3.5" Aluminum Enclosure
True Bypass
Bright Blue LED
This is the new layout of the Effects Loop Blender designed to save room on pedal boards with all the jacks along the top side.
The older version is also available for the same price, just specify when ordering.
Options:
Add a second output for a tuner or another signal chain - $20
Add a JENSEN transformer DI output via XLR jack - $80
Buy an Effects Loop Blender Pedal - $120
|
|
|
Expression Pedal Effects Loop Blender
Same as the Effects Loop Blender but in an expression pedal shell. The foot rocker can be used to control either the blend or the master volume.
Can be used to control the blend between an effects loop and the clean signal or can be used alone as a volume pedal offering boost as well as cut in instrument volume or total volume of effects loop blended with clean.
True Bypass
Fully Buffered Effects Loop
Bright Blue LED
Buy an Expression Pedal Effects Loop Blender - $160
Options:
Add a second clean output for tuner or second signal chain - $20
Add a DI Output (XLR) using a JENSEN transformer - $80
This option also allows the pedal to be used as a high quality passive DI box.
|
|
|
P90 Phaser
Modeled on the MXR Phase 90 with Depth and Feedback controls added. It is also full range so can be used for guitar or bass. The LED
flashes in time with the Rate control.
YouTube demo posted by a customer
Heavy Duty 3.5" x 4.5" Aluminum Enclosure
True Bypass
Bright Blue LED
Buy a P90 Phaser - $120
|
|
|
Mosfet Clean Boost
Up to 35 dB of clean volume boost using Mosfet transistor.
Full range for guitar or bass.
Heavy Duty 2.3" x 4.3" Aluminum Enclosure
True Bypass
Bright Blue LED
Buy a Mosfet Clean Boost - $100
|
|
|
Super Fuzzz
Replica of the 60's Univox Super-Fuzz. Instead of a tone switch there is a tone knob which dials in the amount of mid-cut.
Heavy Duty 3.5" x 4.5" Aluminum Enclosure
True Bypass
Bright Blue LED
Buy a Super Fuzzz - $120
|
|
|
|
|
Microphone Mute Switch
Popless mic on/off footswitch. Turn a microphone on or off instantly without any pops like when simply unplugging the cable.
Works with dynamic and condenser microphones. Red LED indicator shows when the mic is muted and is the only thing powered by the included 9v battery.
Buy a Mic Mute Footswitch - $80
|
|
|
EQ + Boost
Volume boost pedal with bass and treble controls. Offers clean boost or cut to instrument signal plus tone controls. Use it for solos or just as some tone shaping and boost before an ampliflier or other effects.
True Bypass
Clean Boost
Bright Blue LED
Buy an EQ + BOOST - $120
Options:
Add a second clean output for tuner or second signal chain - $20
Add a DI Output (XLR) using a JENSEN transformer - $80
This option also allows the pedal to be used as a high quality passive DI box.
|
|
|
4 Channel Mini Mixer
A 4 channel mixer in pedal format. Every channel is fully buffered to eliminate any interaction (tone or volume loss) between inputs. The output has a slight boost so that quieter instruments can be leveled with louder ones without any loss of overall volume.
Use it to send up to four instruments into one amp or effects chain or it can also be used to combine different effects chains back into one signal.
Mix line level signals like CD or MP3 players with instruments for practice or adding recorded samples into live music.
Heavy Duty 4.5" x 3.5" Aluminum Enclosure
Bright Blue LED
Options:
Add a second output for second signal chain or ampliflier - $20
Add a DI Output (XLR) using a JENSEN transformer - $80
Buy a 4 Channel Mini Mixer - $120
|
|
|
4 Channel Splitter
Split your instrument signal into up to 4 outputs for tuners, separate amplifiers or different effects chains. Every output is fully buffered to eliminate any interaction (tone or volume loss) between the channels.
Heavy Duty 4.5" x 3.5" Aluminum Enclosure
Bright Blue LED
A DI output using a high quality Jensen transformer can be substituted for any of the 4 channels making it into an active DI output.
Options:
Add a DI Output (XLR) using a JENSEN transformer - $80
Buy a 4 Channel Splitter - $90
|
|
|
ABY Switch
Switch between two signals.
Either:
1) Select between two instruments plugged into the same amp, or
2) Select between two amps or signal chains plugged into the same instrument
This is a purely mechanical switch, ie there is no buffering of the signal. If you want to split a signal into 2 or more paths simultaneously you should use the Splitter. If you want to combine 2 or more signals simultaneously you should use the Mini Mixer. Both implement active electronics to avoid problems arising from interactions between signal sources which can lead to volume and/or tone loss.
The included 9V battery powers the LED only.
For an extra $10 one colour can be screen printed on the black enclosure.
Buy an ABY Switch - $75
|
|
|
|
Pedal Clones - Fully Assembled or Kit
Clones of many famous guitar pedals like the Tubescreamers, Big Muff (PI, Sovtek, Green etc.), DOD Overdrive 250, MXR Distortion+, MXR Dynacomp, Ross Compressor, Boss DS1, Rat, Octavia, or Marshall Guv'nor.
Precise replica of the circuitry of these designs with a true bypass stomp switch and in a heavy duty extruded aluminum enclosure.
Other models can be made as well, if there's a schematic available we will make it.
Available in either kit form or fully assembled. Kits include printed and drilled circuit board, drilled enclosure and all necessary components.
For an extra $10 one colour can be screen printed on the black enclosure.
True Bypass
Bright Blue LED
Buy a Pedal Clone fully assembled - $120
Buy a Pedal Clone Kit - $65
|
|
|
Ready To Solder PCBs
Printed and drilled copper circuit boards ready to solder. Available for all the clone pedals above, the effects loop blender and pretty much anything else you need a circuit board for.
Contact effects@woundedpaw.com for more info.
Buy a ready to solder PCB - $20
|
|
