|
Welcome to Wounded Paw Effects for bass and guitar, based in Toronto, Canada.
Prices are listed and credit cards and Paypal are welcome in the online store.
There is a new policy in place regarding 9V batteries in effects pedals. All effects include the 9v center negative jack for the standard Boss PSA, Onespot, Godlyke Powerall or similar adaptors. The new option on all pedals is to leave out the 9V battery for people that always use an adaptor anyways. The battery jack will still be there but if you do not need the battery we feel it better to not contribute to the waste.
Contact Wounded Paw for more info.
|
|
Black Sheep Bass Overdrive
The Black Sheep Bass Overdrive is now available. It's a three band overdrive, the signal is split into lo, mid and hi bands and each one has it's own drive knob and overdrive circuitry. Plus there's a clean blend.
Check out a youtube demo done by a repeat customer of Wounded Paw Pedals:
Demo videos on youtube
Here's the review on BassFuzz.com:
Black Sheep review at BassFuzz.com
Heavy Duty 3.7" x 4.7" Aluminum Enclosure
True Bypass
|
|
|
Battering Ram Overdrive + Fuzz V2.0
The Battering Ram is an Overdrive plus Fuzz pedal which works equally well for guitar or bass or anything else you want to plug into it.
Overdrive plus Fuzz means that while the Overdrive is on all the time, the Fuzz can be added on top of the Overdrive, without affecting the Overdrive volume or tone (parallel processing).
The Fuzz is switched on via a second stomp switch and has it's own LEVEL control.
It's snarling and raspy and can get right out of control if you crank up the SUSTAIN. And for another set of sounds there is the OCT switch to change the fuzz section into an octave up fuzz.
The Battering Ram now has a new feature, the Split switch. The Battering Ram was developed to run the Overdrive and Fuzz sides in parallel when the Fuzz is switched on but bowing to pressure we've changed this. The Split switches allows you to run the channels in parallel or separately. With the Split switch in the up position, when you hit the Fuzz stomp switch the overdrive gets switched off at the same time.
Heavy Duty 4.7" x 3.7" Aluminum Enclosure
True Bypass
Review at BassFuzz.com with video and sound samples
|
|
|
|
|
Blender V3 - 3 Parallel Effects Loops
Formerly named the Super Blender.
The Blender V3 is a parallel effects loop blender with 3 individually selectable, fully buffered effects loops plus a clean channel with tone controls.
The instrument signal is split into 4 channels, sent to the 3 effects loops and the clean channel and then mixed back together.
Each effect loop can be switched on and off individually via their respective footswitches while the clean channel is on automatically when the main bypass footswitch is turned on. But the Blender V3 has a new trick, the Clean > A toggle switch. Flip this toggle up to send the clean channel to Effects Loop A. The footswitch and Volume for Effects Loop A will now control the clean channel instead.
Effects Loop B has a feedback control which sends the return signal from the effect back to its send for interesting results.
There is also a switch to change channels B and C into a series configuration where the return from effects loop B is sent to the send of effects loop C.
Instruction Manual
Heavy Duty 7.5" x 5" Aluminum Enclosure
True Bypass
|
|
|
Effects Loop Ultra Blender
The Ultra Blender is being replaced by the Blender V4. Details and pictures will be available soon.
On the Blender V4 there will now be 4 switchable effects loops instead of 3 but the first loop can be used as a clean channel if nothing is plugged into it. The other big thing is that loops C & D will have a rotary switch to go from parallel to series with C > D or D > C. The series parallel switch needs to be a rotary switch to have 3 positions so it won't be footswitchable.
So there are 5 footswitches: the main bypass, loop A/Clean and loops B, C, D.
The Ultra Blender is the bigger brother to the Super Blender. It includes all the features of the Super Blender but now the Clean channel is footswitchable like the effects loops and the series/parallel switch for loops B and C is now a footswitch instead of a toggle. This is a bigger box than the Super Blender, measuring 8.7" x 5.7" x 2.1" high, so be warned. It had to be that large to fit all the footswitches.
Heavy Duty 8.7" x 5.7" x 2.1" Aluminum Enclosure
True Bypass
|
|
|
Blender V2 - Effects Loop
Blend your clean signal with an effects loop.
Two stomp switches, one for true bypass / on and the other to switch on and off the effects loop.
Separate volume controls for the clean channel and the effects channel.
Phase switch on the effects loop.
Bass and treble tone controls on the clean channel.
Heavy Duty 4.7" x 3.7" Aluminum Enclosure
True Bypass
Bright Blue and Red LEDs
|
|
|
Blender V1 - Effects Loop
Original Version 1 of the Effects Loop Blender with the addition of a phase switch for the effects loop
The Blend controls the mix of the effects loop and the clean signal and the Volume controls the output level of the mixed signal.
The Blender V1 is now in a smaller enclosure, 'B' size box 4.4" x 2.3".
No battery jack, standard 9V adaptor only.
True Bypass
|
|
|
Expression Pedal Effects Loop Blender
Same circuitry as the Blender V1 but in an expression pedal shell. The foot rocker is used to control the blend.
True Bypass
Fully Buffered Effects Loop
|
|
|
P90 Phaser
Modeled on the MXR Phase 90 with Depth and Feedback controls added. It is also full range so can be used for guitar or bass. The LED
flashes in time with the Rate control. The P90 will work equally well on guitar or bass.
Youtube guitar demo by Tonefactor
YouTube demo posted by a customer
Heavy Duty 3.7" x 4.7" Aluminum Enclosure
True Bypass
|
|
|
Super Fuzzz
Replica of the 60's Univox Super-Fuzz. Instead of a tone switch there is a tone knob which dials in the amount of mid-cut.
Heavy Duty 3.7" x 4.7" Aluminum Enclosure
True Bypass
Bright Blue LED
|
|
|
ECHO Delay/Reverb
Analog sounding delay that can go from short reverb sounds to long delays. Based on the Rebote 2.5 design using the PT2399 IC.
Heavy Duty 3.7" x 4.7" Aluminum Enclosure
True Bypass
Bright Blue LED
MP3 Sound Samples
|
|
|
Microphone Mute Switch
Popless mic on/off footswitch. Turn a microphone on or off instantly without any pops like when simply unplugging the cable.
Works with dynamic and condenser microphones. Red LED indicator shows when the mic is muted and is the only thing powered by the included 9v battery.
|
|
|
EQ + Boost
Offers 25dB of clean boost with tone controls.
The boost is clean but adding 25dB can overdrive amplifliers or other devices in the
signal chain to get pleasing results.
The Baxandall type tone section offers boost or cut to treble and bass and has completely flat response with both controls at noon.
Heavy Duty 3.7" x 4.7" Aluminum Enclosure
True Bypass
Clean Boost
|
|
|
4 Channel Mini Mixer
A 4 channel mixer in pedal format. Every channel is fully buffered to eliminate any interaction (tone or volume loss) between inputs. The output has a slight boost so that quieter instruments can be leveled with louder ones without any loss of overall volume.
Use it to send up to four instruments into one amp or effects chain or it can also be used to combine different effects chains back into one signal.
Mix line level signals like CD or MP3 players with instruments for practice or adding recorded samples into live music.
Heavy Duty 4.7" x 3.7" Aluminum Enclosure
Bright Blue LED
|
|
|
4 Channel Splitter
Split your instrument signal into up to 4 outputs for tuners, separate amplifiers or different effects chains. Every output is fully buffered to eliminate any interaction (tone or volume loss) between the channels.
Heavy Duty 4.7" x 3.7" Aluminum Enclosure
|
|
|
|
